The first aspect that distiguishes the old from the new model is the X-ART tweeter. The ‘X’ stands for ‘eXtended frequency response’ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM (Pulse Width Modulation) amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel of the A7X are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
The X-ART (eXtended Accelerating Ribbon Technology) tweeters and midranges incorporate a new approach to the Air Motion Transformer concept originally developed by Dr. Oskar Heil. ADAM Audio has improved upon this splendid idea utilizing superior geometries and materials to achieve unprecedented audio fidelity. X-ART strikes a new path concerning the kinematics of moving air, resulting in a dramatic improvement in the quality of audio reproduction.
The X-ART membrane consists of a pleated diaphragm in which the folds compress or expand according to the audio signal applied to them. The result is that air is drawn in and squeezed out, like the bellows of an accordion.
The ADAM X-ART design overcomes the piston-like motion of all conventional drivers and their inevitable problems by achieving an improvement in air loading by a factor of 4 over conventional transducers. To illustrate the basic principle by a comparison: When you breathe, your thorax is moving slowly whereas the air is moving comparably fast. Similarly, the X-ART diaphragm presses the air faster in or out of its folds than they themselves are moving. This markedly superior ”motor” is responsible for the unprecedented clarity and pristine transient reproduction that can be heard with the ADAM X-ART drive units.
In addition, the X-ART tweeter’s pleated membrane avoids the typical breakup/distortion and subsequent dynamic limiting at higher frequencies of stiffer voice coil designs, such as those found in dome and cone tweeters. Another positive result of the X-ART design is that the driving ”stripes” are in direct contact with the outer air and are cooled immediately.
Pulse Width Modulation
PWM (Pulse Width Modulation) – sometimes referred to as Class D amplification, sometimes called Switching Amp Technology – converts the incoming signal to a series of rectangular waveforms of equal height. The width of the rectangles varies in time and the relation of the width of the rectangles represents the musical signal. This waveform can be amplified much more simply, as the transistors are not modulated anymore; instead they are used as switches that only turn the power supply voltage on and off.
It is possible that a very fast mechanical switch could do the job, but power transistors are a better choice for the task, so PWM amplifiers still work pretty much like conventional Class AB designs. It is important to note there are no bits and bytes involved, so “Digital Amplifier” is a misleading and inaccurate term.
The main advantage of PWM amplifiers is their extremely high efficiency (>90%). As a consequence the heat to be dissipated is only one fifth of earlier designs, leading to much lower temperatures within the amps and making the use of heat sinks obsolete.
This principle has been known for decades, but time was needed to develop units that perform at the leading edge in sonic reproduction quality and yet still maintain the high efficiency mentioned previously. The ADAM units use the new technology for both the amp and the power supply section (i.e. no more transformers) combined with state of the art input and filter sections to achieve the best in multi-channel active studio monitoring.
- Excels at nearfield monitoring
- Equipped with the X-ART tweeter and a large (7") midwoofer
- 50W A/B tweeter amplifier
- 100W PWM midwoofer amplifier
- Upper corners slanted to minimize reflections
- Large, double bass reflex tubes
- ±4dB gain for the high frequencies
- Two shelf filters for the high and low frequencies
- XLR (balanced) and RCA (unbalanced) connectors
What is the process after I checkout?
Following checkout your order number will be generated and stock availability confirmed before a Paypal invoice is emailed to your registered email address. If your order is not in stock and cannot be shipped within 10 business days then your order will be cancelled. If your order is in stock or can be ordered from the manufacturer for FEDEX dispatch within 10 business days then we will email a Paypal invoice to complete payment.
Following checkout your Paypal invoice will be emailed to you within 24 hours if your entire is in stock or readily available with the manufacturer (Monday-Friday). You will receive a Paypal invoice (request for payment) from AudioBuy or from one of our shipping partners.
When do I pay?
You do not pay at checkout. If your order is in stock or readily available from the manufacturer then a Paypal payment request (invoice) will be emailed to you from AudioBuy or from one of our shipping partners. This is to ensure that we do not collect payment for orders which cannot be promptly dispatched and delivered.
Will my shipped order be delivered safely and securely?
All Australian orders are shipped with FEDEX and are marked as "fragile" to ensure that your ordered items are securely and safely handled prior to final delivery. All orders are dispatched with protective casing and packaging to further protect your ordered item(s) during transit to your delivery address. All orders require signature upon delivery to ensure that your order is delivered to the correct recipient at the correct address , apartment number etc. If you are unavailable at the time of delivery your order will be held at the local Australian FEDEX center and a calling card left at your delivery address to organise re-delivery or pickup.
How do I check for stock levels?
Email "[email protected]" to enquire about current stock levels for the . We aim to stock popular items at all times and are able to quickly order in products if they are currently not in stock. In the event of product backorder or product discontinuation your order will be cancelled and a payment request (Paypal) will not be processed.
Do we ship products to Australia?
Yes. AudioBuy ship the majority of products to all international locations serviced by FEDEX. You will be notified during checkout if your order is unable to be delivered to your region due to manufacturer restrictions and/or other shipping restrictions. All listed prices are inclusive of FEDEX shipping costs.
What are our hours of operation?
Stock inventory and order related enquiries are monitored and responded to everyday excluding major public holidays (Monday-Sunday). Orders are physically shipped during standard FEDEX hours (Monday-Friday , excluding major public holidays). Paypal invoices for order processing are issued Monday-Friday excluding major public holidays.
When will my order be delivered?
Following Paypal payment your order will be FEDEX dispatched within 1-2 business days if your order is in stock. If your order is only in stock with the manufacturer then we will require up to 10 business days to FEDEX dispatch your order. After your order has been shipped we will email your FEDEX tracking number to the email address you provided during checkout / account sign-up. The average FEDEX transit time is 3-5 business days to most international locations.
Can you price match with another retailer?
Yes. Contact "[email protected]" with the product name and the competing website's URL. Our total price including FEDEX delivery is currently . When comparing prices with Australian or international retailers be aware that their prices may not include international or domestic FEDEX shipping costs.