14 easy-to-access top-panel inputs provide flexible options for microphones or instrument connections, including 10 mic, 14 line, and 2 instrument inputs to allow easy access for connecting microphones, instruments or other audio sources for live recording or mixing.
A Bluetooth 5.0 enabled Stereo Input Source Channel also provides stereo RCA and 1/8” stereo (selectable) jacks for streaming audio device level control.
Mic Inputs 1 through 8 deliver pristine audio quality, featuring TASCAM’s Ultra-HDDA (High Definition Discrete Architecture) technology for pure, transparent natural tone with ultra-low noise.
A tactile gain knob tops each channel for precise tweaking of input levels. A push-button Lo-Cut filter and three-position Input Selector (Live/USB/MTR) facilitate quick and precise control of input source signals. A 1-knob inline compressor is available on inputs 1-8 as is a mid-range sweepable 3-band EQ.
3 Aux bus (MON1, MON2 [pre/post], FX) and PFL Listen round out the Model 16’s pro-level signal path routing options. A Sub bus provides an additional stereo line out source to the master SEND section.
3 aux outs let you route the audio signal for stage monitoring, or to external gear such as outboard effects, signal processors or headphone mixes. And the footswitch control jack provides additional control features.
The Model 16’s MTR section features a powerful internal 16-track multi-track recorder, capturing 14 Inputs and 2 main mix simultaneous tracks of audio to an internal SD card in pristine 24-bit/48 kHz quality. Record anything from live performance to rehearsals, worship events, spoken word and meetings, as well as perform overdubs and punch-in/out quickly and easily.
Recorded tracks can be immediately mixed, mastered or exported to a computer for further editing, formatting and publishing.
An internal 16 input/14 output USB audio interface captures audio at a 24-bit/48 kHz sampling rate for recording or playing back from an external DAW (digital audio workstation). The Tascam USB driver delivers the minimum size of the audio buffer which can be set to as low as 4 samples, resulting in extremely low latency and the highest level of efficiency when recording audio.
Using the channel mode switch, each channel can select the input source as needed. This allows a flexible input configuration to be selected where some inputs can be live, other inputs can play tracks from the internal MTR, while other inputs can play tracks from a computer via USB, all independently.
The Model 16’s versatile effects section offers 16 editable and foot-controllable multi-effects, including reverb, delay, chorus and flange.
A 4-Band EQ with mid-range sweepable, wide/narrow Q can be dialed in for crafting the perfect mix, assignable to MAIN outs or MON 1/2 outs as you like.